Rebuildable Steel Breathers
75% of hydraulic system failures are caused by contaminated fluid.
In any reservoir containing a fluid, air is breathed in and out as operating temperatures change, or as a tank is filled and emptied. The problem with a simple breather cap is that it allows abrasive contaminants and water to enter the tank. The Des-Case rebuildable steel breather helps eliminate the problems that result from contaminated air.
Benefits of Des-Case Breathers
- Elimination of water contamination of the oil or other fluids
- Elimination of rust and corrosion inside the container
- Increased oil and filter life
- Reduced abrasive wear, down-time, and repair costs
- Improved lubricant performance
- Eliminates chemical reactions, or spoilage
- More reliable equipment performance
Designed for Severe Operating Conditions
The steel breathers were designed specifically for applications where there are very high temperatures, extremely dirty air, or a corrosive environment. They are ruggedly designed, with housings of epoxy coated carbon steel or stainless. The hygroscopic agent (desiccant) is enclosed in a bag of polyester filter material. This desiccant bag filter is easily installed when it is time to replace or recharge the unit.
Adsorption Capacity
| Model # | Capacity (L) | Capacity (gal) |
|---|---|---|
| DC-RS-3 | 0.54 L | 0.14 gal |
| DC-RS-5 | 0.90 L | 0.24 gal |
| DC-RS-9 | 1.62 L | 0.43 gal |
| DC-RS-15 | 1.62 L | 0.43 gal |
| DC-RS-25 | 4.5 L | 1.19 gal |
| DC-RS-50 | 9 L | 2.38 gal |
| DC-RS-75 | 13.5 L | 3.57 gal |
| DC-RS-100 | 18 L | 4.75 gal |
| DC-RS-150 | 27 L | 7.13 gal |
| DC-RS-200 | 36 L | 9.51 gal |
The 1-micron pleated filter has a very large surface area, resulting in long service life. Like the bag filter, it is easily replaced without removing the breather from service.
The steel breathers accommodate large air flow rates with minimal pressure drops.
Models, Accessories & Installation Methods
Dimensions
| Model # | Height (in.) | Height (cm) | Width (in.) | Width (cm) | Weight (lbs) | Weight (kg) |
| DC-RS-3 | 11.5" | 29.2 cm | 10.13" | 25.72 cm | 16 lbs. | 7.26 kg |
| DC-RS-5 | 13.75" | 34.9 cm | 10.13" | 25.72 cm | 20 lbs. | 9.07 kg |
| DC-RS-9 | 18.25" | 46.4 cm | 10.13" | 25.72 cm | 27 lbs. | 12.25 kg |
| DC-RS-15 | 19.25" | 48.9 cm | 15.5" | 39.37 cm | 49 lbs. | 22.23 kg |
| DC-RS-25 | 22.5" | 57.1 cm | 15.5" | 39.37 cm | 64 lbs. | 29.03 kg |
| DC-RS-50 | 31.25" | 79.4 cm | 15.5" | 39.37 cm | 100 lbs. | 45.36 kg |
| DC-RS-75 | 39.75" | 101 cm | 15.5" | 39.37 cm | 144 lbs. | 65.32 kg |
| DC-RS-100 | 31" | 78.7 cm | 23.5" | 59.69 cm | 190 lbs. | 86.16 kg |
| DC-RS-150 | 36.75" | 93.3 cm | 23.5" | 59.69 cm | 253 lbs. | 114.76 kg |
| DC-RS-200 | 42.75" | 108.6 cm | 23.5" | 59.69 cm | 315 lbs. | 142.88 kg |
Mounting Methods
Since all Des-Case rebuildable steel breathers are designed with standard NPT pipe threads for mounting, these units can be installed in nearly any application with reducers, adapters, etc., available at any local plumbing or hardware supply.
| Model # | Size |
| DC-RS-3 | 2" |
| DC-RS-5 | 2" |
| DC-RS-9 | 2" |
| DC-RS-15 | 3" |
| DC-RS-25 | 3" |
| DC-RS-50 | 3" |
| DC-RS-75 | 3" |
| DC-RS-100 | 4" |
| DC-RS-150 | 4" |
| DC-RS-200 | 4" |
For part codes containing X, substitute the appropriate RS model number. (Example: the part code for a sight glass cartridge for the DC-RS-150 would be DC-RS-150-SG1.)
| Model # | Description |
| DC-13-6C | Threaded Adapter for DC-RS-3, DC-RS-5, and DC-RS-9 |
| DC-13-10C | Threaded Adapter for DC-RS-15, DC-RS-25, DC-RS-50, and DC-RS-75 |
| DC-13-40C | Threaded Adapter for DC-RS-100, DC-RS-150, and DC-RS-200 |
| DC-RS-X-RK | Rebuildable Steel Breather Rebuild Kits |
| DC-RS-X-F1 | Rebuildable Steel Breather Filter Elements |
| DC-RS-X-D1 | Rebuildable Steel Breather Desiccant Bag Sets |
| DC-RS-X-SG1 | Rebuildable Steel Breather Sight Glass Cartridges |
| DC-RS-X-P1 | Rebuildable Steel Breather Oil Coalescing Foam Inserts |
| DC-RS-X-G1 | Rebuildable Steel Breather Gasket Seals |
