After-Hours Service:

514-697-8810 (East)
905-301-4523 (Central)
604-278-4290 (West)

Select Mahle products - Suction filters - Line filters - Duplex filters - Air Breathers - Return-Line filters - Partial-Flow filters - Spin-On filters - Filter Elements - Metal-Edge filter - Internal Pressure Segment Cleaning - External Pressure Segment Cleaning - External Pressure Continuous Filtrate - External Pressure with Scrapers - OTS :: Oil Treatment - Bilge Water Deoilling - Crude Oil & Wastewater - Fuel & Oil - Simplex / Duplex Strainers - Automatic Back-Flushable Filters

NFV Crude Oil Dewatering

1st Stage: Muli-Phase Separation MPS

The “multiphases” (oil, water, solids) are separated in the first stage (MPS): the oil is pumped through the MPS profiles. As it passes through the inlet the oil is swirled on to the MPS profiles and the small water droplets merge to form larger drops. These are bound by the gravitational and adhesion forces of the profiles and directed down into the water collecting area. The solids slide down the profiles into the sludge holding tank. This operation is also suitable for deoiling.

2nd Stage: Mechanical Emulsion Breaker MESB

The fine water droplets are separated in the second stage: the oil flows through a micro -fibre bed where small water droplets merge to form larger drops which flow down into the water collecting area.

3rd Stage: Membrane Filtration

In the third stage the oil flows through a water-repellent membrane which dependably retains the last remaining water droplets.

Mahle NFV Systemic Crude Oil Dewatering and Waste Water Deoiling

For technical assistance and sales enquiries, contact us:

• Phone: 1-888-924-6233
• E-mail: filters.sales@filtramax.com