After-Hours Service:
514-697-8810 (East)
905-301-4523 (Central)
604-278-4290 (West)
 |
NFV Fuel Oil Treatment
Single & Multiple-Stage Fuel & Oil Treatment Systems for All Needs
NFV fuel and oil treatment systems can be used for all types of middle distillates, e.g. diesel fuel, light fuel oil, marine diesel oil MDO and lubricating oil. For all the most common contaminations in these media, including solid and suspended particles, such as dust, sediments, rust, and water, our systems represent the most efficient and cost-effective solution.
To treat the first phase, Mahle offer a number of combined filter coalescers with varying degrees of fineness; these systems can be optimally adapted to meet specific requirements and tech nical configurations. An optional downstream separator membrane can be used to reduce the water content to 20 ppm unbound water in order to prevent contamination with microorganisms, which begins at 60 ppm. To treat heavy contamination with solids we recommend using a dual-phase version of the filter coalescer; this version has an upstream filter that can be exchanged independently.
Configuration & Design
MAHLE Industriefiltration supplies fuel and oil treatment systems with a wide range of flow capacities. The systems consist of a pump with a downstream depth filter or filter coalescer and an optional permanent separator, as well as a central control box, full differential pressure monitoring system, ventilators and an automatic water outlet system.
The systems can be supplied in vertical or horizontal configurations. They can be installed on the storage tank to continuously treat the medium or used to clean the medium prior to using, i.e. before it is pumped into the day tank or the engine.
Mahle Filtration and Water Separation
For technical assistance and sales enquiries, contact us:
- Phone: 1-888-924-6233
- E-mail: filters.sales@filtramax.com